The PB-Vortex-DX3 with the dimensions 90x96mm is based on the DM&P Vortex86-DX3 system on chip (SoC). The clock frequency of the Vortex86-DX3 dual core processor is 1GHz. The soldered 2GB (DDR3L, 1333) memory allows the use in rough industrial environment. A complete ISA bus and PCI interface make the PC/104 board an all-rounder and a perfect replacement of discontinued x86-based PC/104 boards. Serial bus interfaces are available via SM and I²C. The TDP of about 6 watts allows passive cooling. Dual display via CRT and 18/24bit single-channel LVDS is supported. The board has 2x Ethernet (10/100 and 10/100/1000 Mbit) ports, 4x USB 2.0, 2x COM, one SATA connector for HDD and M.2 socket. An absolute highlight is the soldered mass memory (option) with up to 64GB eMMC Flash, as well as an I/O interface GPIO with 4 in & 4 out lines.

• Specifications

CPU:	DM&P Vortex86 DX3 (2 x Up to 1.0 GHz, 5W)
Technology:	x86
Audio:	reserved 26 pin connector
Miscellaneous:	GPIO 4x in & 4x out
Firmware:	AMI® 64Mbits SPI Flash
Power Requirement:	DC 5V Input with 1x4 pin Phoenix contact connector
Power from W:	5 W
Operating Temperature:	-20°C to +70°C
Extended Temperature:	-40°C to +70°C optional
USB:	4x USB 2.0
Serial Interface:	2x COM port (COM2 port is RS232/422/485)
Bus Interface:	1x PCI PC/104™, 1x ISA PC/104™
Format:	ETX
Chipset:	SoC (System-On-Chip)
DRAM:	Up to 2GB DDR3 memory on board
Graphic Controller:	GPU integrated in CPU
Display Interface:	VGA (1920x1440), 24bit LVDS(DS90C187) 1920x1200
Storage:	1xSATA I Port(1.5Gb/sec)/ M.2 Socket B key (2242 only)
Network:	1x GbE (Intel® i211AT) 1x Fast Ethernet
Dimensions:	96mm x 90mm (116mm) / PC/104 2.6 spec.

• Order Info

name	code	description	availability
PB-VORTEX-DX3	AB1-3G03	PB-Vortex-DX3 4GB eMMC, 1.0GHz, 512kB, 2GB	MP

• Downloads
Show all
• BIOS
• Certificates
• Datasheet
  • PB-Vortex-DX3_DS.pdf
• Drawing
• Driver
• Embedded Controller
• Manual
  • restricted
    • PB-VORTEX-DX3_Rev1.4.pdf
• Pictures
  • PB-Vortex-DX3_bottom.JPG
  • PB-Vortex-DX3_top.JPG