Intel® Xeon® E5-2600Lv3 series processor based on PCIMG 1.3 SHB with DDR4 REG SDRAM, VGA, Dual Gigabit Ethernet, and SATA/USB
ROBO-8122VG2R is based on Intel® C612 chipset and dual Xeon® processors. It’s a server grade SHB. Build with high conputing power and PCI express expension support, it’s suitable for Military, industrial automation, networking, Medical and Digital Signage applications.

  • Support Intell® 6C~12C Xeon® processors with LGA 2011 package
  • Del i ver s up to 256GB DDR4 ECC registered memory assured the computer reliability and benefited the data swapping process
  • Adopt ASPEDD AST1400 graphic engine offers solid 2D performance by VGA port
  • High speed Gigabit Ethernet based on PCI express x 1 interface
  • Flexible PCI Express configuration on backplane up to total 36 lanes

Processor - Intel® 6C~12C Xeon® E5-2600Lv3 series processor (50~75W) with 15~30MB Cache in LGA2011 package (support up to 75W per CPU)
- Intel® QPI transfer rates: 6.4, 8 and 9.6GT/s (depends on CPU sku)
- DMI x4 Link: 5 GT/s
- Supports Intel® Hyper-Threading, Virtualization Technology (VT-x), and QuickPath Technology
BIOS Intel® C612 PCH
Storage Devices - Supports up to 256GB DDR4 2133/1866 SDRAM on Eight 288-pin DIMM sockets
- Supports Register
Watchdog Timer - 4x SATAIII drives (Dual ports via Backplane)
- RAID 0, 1
Hardware Monitoring Programmable via S/W from 0.5 sec. to 254.5 sec.
Expansion Interface System monitor(Voltage,Fan Speed and Temperature)
Super I/O(Embedded Controller) - From per CPU: 1x PCI Express x16 or 2x PCI Express x8 or 1x PCI Express x8 + 2x PCI Express x4 by different bios support (Gen3 up to 8.0 GT/s)
- From PCH: 1x PCI Express x4 or 4x PCI Express x1 by different bios support (Gen 3 up to 8.0 GT/s)
Audio ITE IT8772E
Ethernet N/A
Serial Port - On-board Intel® WGI217LM + WGI210AT gigabit ethernet controller
- Dual 10BASE-T / 100BASE-TX / 1000BASE-T Ethernet
- PCI Express x1 interface based on gigabit ethernet
- Single RJ-45 connector with two LED indicators for WGI217LM on bracket, the other port route to gold finger section C on BP for WGI210AT
USB 2x Tx/Rx signal route to gold finger section C on BP (4 pins)
Keynoard & Mouse - 4x USB 2.0 ports ( through backplane)
- 480Mb/s bus capable of high-speed/full-speed/low-speed data ranges
- 2x USB 3.0 ports on bracket
- 5Gbps bus capable of high-speed/ full-speed/low-speed data ranges
GPIO - 2x USB 3.0 ports on bracket dedicated to keyboard & mouse
Others N/A
Display Interface ASPEED AST1400
Dimension CRT on bracket: Resolution up to 1920x1200@60Hz
Power Supply 338.5mm(L) x 126.39mm(W), 13.33"(L) x 4.98"(W)
Environment Typical: +12V, +5V
-Support ATX mode
MTBF Operatin Temperature:0°C~55°C (for 75W CPU limitation)
Storage Temperature:-20°C~80°C
Relative Humidity:5~90%,non-condensing
Thermal Solution depends on chassis design and system fan selection

Ordering Guide

PICMG 1.3(PCI-E).LGA2011. Dual Intel Haswell-EP processor with eight DDR4 REG DIMM sockets.SHB.w/VGA/GbE/SATA III/USB 3.0 ports

Packing List

  • B6902932 SATA III cable
  • B8981980 PICMG SBC Handling and Installation Notice
  • B8983670 Installation CD

  • B8307810 All in one CPU cooler
Quote & Request Sales Request or Technical Request  
  • Specifications are subject to change without notice.
  • Pentium® 4, Pentium® III, Pentium® II and Celeron® are registered trademarks of Intel® Corporation.
  • Xeon® is a trademark of Intel® Corporation.
  • Other trademarks, logos, brands and company names are the property of their respective owners.
Member Login
Country | Sitemap |  
Asia Region
America Region
Europe Region