PQ7-M640F
Qseven™ Module with NXP® i.MX6 family processor
  • Ultra low power consumption: 2W (Single core) ~ 6W (Quad core)
  • Longevity support more than 10 years.
  • Support Q7+ function (3x UART, CAN, MIPI interface, 2nd LCD interface, GPIO)
  • Built-in H/W Graphics accelerators with Open GL ES2.0, Open VG1.1 and 4x independent displays support.
  • Multi-format of encode & decode
QsevenNXP
Qseven module based on Freescale™ i.MX6 family, ARM™ Cortex-A9, Solo / Dual / Quad core processor with onboard 1GB DDR3 (up to 2GB), PCIe 1-lane interface, VGA, HDMI, single LVDS 1-ch or dual LVDS (18/24-bit) 2-ch and CAN Bus. Portwell PQ7-M640F (6Q, 6D, 6S) is design as CPU module with series of Qseven® form factor. It is based on embedded Freescale™ i.MX6 processor, an ARM® Cortex®-A9 processor, Single-, Dual- and Quad-Core. In connection with external standard IO device, a 80-pin Carrier board PQ7-C100ARM is suggested for the following expansion purpose: 3x UART, 2x I2C, 1x Keypad, 1x CAN bus, interfaces of 1x RGB parallel LCD, 1x MIPI-DSI, 2x MIPI-CSI for camera, 1x SPDIF, 1x ESAI audio and 4x PWM.
Technology:ARM
Format:Qseven
Type:module
Chipset:SoC (System-On-Chip)
DRAM:on board DDR3 Up to 2GB
Graphic Controller:integrated
Storage:onboard eMMC 5.0 flash up to 64 GB, onboard mSD socket
Network:1x 10/100/1000 GbE
Bus Interface:1x SDIO, 2x SPI, 2x I²C, 1x I²S, 1x HDA (share w/I²S), 2x CANBus, 4x UART, 2x GPIO
Serial Interface:1x SATA 2.0 (3 Gb/s); 1x PCIe x1 Gen2
USB:5x USB2.0 HOST, 1x USB2.0 OTG
Firmware:Kernel 3.14.28_Uboot 2014.04
OS Support:Linux, Yocto 1.7
Power Requirement:5V DC ±5%
Operating Temperature:0°C to +60°C
Extended Temperature:-40°C to +85°C
Dimensions:70x70 mm
namecodedescriptionavailability
Show all

PQ7-M640F

Back to list